High Pressure Pumps | 
The X-PumpTM is a powerful, ultrahigh-pressure pump designed to operate up to 36,000 psi and 16 gpm with minimal maintenance and reliable performance. Built to be mobile, the pump is mounted on a rugged steel-tube frame that includes slots for easy transport by forklift. The pumps are powered by either a 360 HP turbo diesel or 400 hp electric motor. The X-PumpTM features: Operating Pressure - 36,000 psi (2,450 bar) Volume – 16 gpm (60 lpm) Straightforward controls for remote operation. Automatic shutdown for low oil level, high oil temperature, or low inlet water pressure. Dual in-line filter system that removes 5 micron and 1 micron particles. A safety valve to relieve system pressure if over-pressure conditions occur. Red and amber lights are used for each sensor. The lamps remain lit in shutdown condition to assist in troubleshooting.
PRODUCT SPECIFICATIONSThe specifications for the X-PumpTM are given below. Contact Rampart Hydro Services if you required additional information. Physical SpecificationsHeight 84 inches (213 cm)Width 101 inches (256.5 cm)Depth 66 inches (167.6 cm)Weight (width fluids) 10,500 lbs (4762.71 kg) Pump Rating at Maximum Continuous OperationOutput Pressure 36,000 psi (248,220 kPa)Output Volume 16 gpm (60.4 lpm) Pump Speed 600 RPM Diesel Engine Mitsubishi 8DC9T Caterpillar 3406/8HP (cont.) 360 360RPM (cont.) 2100 2100Cylinders V-8 V-8 or V-6Charging Turbo TurboCooling Water WaterFuel Consumption 16 gph (60.4 lph) 16 gph (60.4 lph) |
|
| |